You have been using your Bosch Glide Miter Saw for a while but now run into some problems that frustrated you and your woodwork? Instead of calling the customer service and getting ready for the hefty shipping fee to get them fixed, you want to compromise by your self? No more worries, here we provide some of the best solutions for your Bosch Glide Miter Saw Problems. 

Bosch Glide Miter Saw

Bosch Glide Miter Saw Problems With Best Solution

Bosch Glide Miter Saw Problems 

There are several problems you might encounter with your Bosch Glide Miter Saw, but the following are some of the most frustrating commonly faced by carpenters like you.  

Incapable Dust Collection

Sawdust that goes through the provided hose will end up blowing all over the place behind the saw. Even with a dust bag that comes with the miter saw to plug into that 90-degree hose would not satisfy you since that bend reduces the airflow or suction power. 

Tear-out problems

The throat plate that comes with your miter saw does have a clearance – it’s a gap between the edges of the insert and the blade. This results in a lack of support on your working boards and the creation of the tear-out on the bottom of the board. Then you can’t have a clean-cut at all. 

Best Solutions

Here are some upgrades you can make to have better performances from your Bosch Glide Miter Saw.

Modify your Dust Collection

You can remove the 90-degree bend by twist-pulling it off and install the dust hose onto the plastic dust shroud of your miter saw. Then you can direct this hose wherever you would like to. You will see a tremendous difference – no more sawdust all over the place. 

Make a Zero Clearance Insert

A Zero Clearance Insert

After measuring the miter saw throat plate, cut a piece of plywood with length and thickness accordingly. You also need to locate the screw holes on your zero clearance insert and drill them. Finally, install this insert in place of the throat plate, then make clean cuts on it from up and down. 

Now you are good to go. 


Up to this point, you have probably grasped some ideas to make your miter saw a super-powerful machine for you to have tear-out free sharper cuts and a better working environment with the sawdust contained.