Don’t you hate it when your flushing toilet gets clogged or becomes slow? No doubt that a slow flushing toilet is a frustrating thing. And fixing a slow flushing toilet will cost you more money since you need to call a plumbing expert. However, if you want to save money, you can fix this problem by yourself. To assist you at this point, we have shown a few useful methods of “how to fix a slow flushing toilet.” 

Different Methods on How To Fix A Slow Flushing Toilet

 If you are a DIY lover, then below are some of the slow flushing toilets fix methods.

1. Use a Plunger To Fix Slow Flushing Toilet

 The most common reason for a slow flushing toilet is – a clogged drain. Many reasons are behind there for a clogged drain. But the most common cause is someone flushed some unusual thing, and the drain gets clogged because of that.

 Now how will you understand something gets blocked in the drain?

 After flushing, if the water level doesn’t show any tendency to reduce within 1 – 2 minutes, be sure because of something, water flow is getting blocked.

 Well, following many different methods, you can get rid of this problem. In many ways, a plunger will give you the most effective solution.

 Take a plunger, insert it to the toilet drain. And then give a gentle plunge in it. Wear hand gloves because things can get messy.

 Don’t forget that a plunger is full of air. So, a hard plunge may spill out all water. After giving the first plunge, you can start pushing faster and faster with the plunge.

 It is worth remembering that plunging is a slow system for unclogging any blockage. Following this process, any hard clog will take a minimum of 15 – 20 minutes to lose.

 Continue the process until the toilet drain gets unclogged. Be patient. If you are not getting any visible result, go through the next process.


2. Use a Mixture of Dishwashing Soap and Drain Cleaner

 The next process is to use a mixture of hot water, dishwashing soap, and drain cleaner.

 Firstly, take 1-gallon of hot water and pour it into the toilet. Give it a rest for the next 5 – 10 minutes and remove anything that may be trapped in the drain.

 Be cautious while using hot water if your toilet is made of porcelain. Warm water may damage the enamel, and cracks may come.

 During the resting time of the hot water inside the toilet bowl, get some drain cleaner. Make sure the drain cleaner is toilet-approved. Take a small amount of drain cleaner and pour it into the toilet bowl. Depending on the cleaner instruction, either you can flush the toilet immediately or let it sit.

 Next, the toilet tank lid needs to be removed and then grab the overflow pipe. Take a tablespoon of a dishwasher, pour it into the overflow pipe. Let the dishwasher rest for the next 10 minutes to ooze gradually through the overflow pipe.

 During this 10 minutes, some calcium deposits will happen. Once the 10 minutes is passed, flush the toilet. This way, mineral deposits and clogs will get removed.


3. Replacing the Damaged Fill Valve

 Because of the damaged fill valve, you will experience slow flushing toilets and water wastage.

 Once you locate a problem in your toilet fill valve, the very next thing should be turning off the toilet’s water supply.

 Take the lid off from the tank and drain out all the water from the toilet by flushing it. Make sure no liquid is left behind. If required, use a piece of cloth to mop up all the liquid. You will find a nut that creates a connection between the water hose and the bottom of the fill valve. Unscrew the nut.

 Then take out the damaged fill valve and place the new valve in its place.

 By using a wrench, the valve needs to be secured at the bottom of the tank with a nut. Next is to reconnect the water supply hose and the refill valve. Finally, you can turn on the water supply and check the flushing capabilities of your toilet.


Last Words

Different Methods to Fix Slow Flushing Toilet

If you want longer-lasting service from your toilet, proper maintenance is a must. It is significantly essential to check your toilets periodically to learn about any problem.

 Following the methods mentioned above, the question “how to fix a slow flushing toilet” – will not be a puzzle anymore. I believe, now, you can successfully fix the slow flushing toilet.